64-bit Fink for 10.6

From OS X Scientific Computing

Jump to: navigation, search


Contents





Jumpstart Instal 64-bit fink into /sw

Do this only if you do not already have anything in /sw

First: Download this tarball

 curl -O  http://scottlab.ucsc.edu/~wgscott/downloads/fink_for_10.6_64bit_base_install_aptsources_sw.tgz
 

or just click this link: [curl -O http://scottlab.ucsc.edu/~wgscott/downloads/fink_for_10.6_64bit_base_install_aptsources_sw.tgz fink_for_10.6_64bit_base_install_aptsources_sw.tgz ]

Second: Unpack it:

tar xvfz fink_for_10.6_64bit_base_install_aptsources_sw.tgz

Third: Move the resulting sw folder into position at root level:

sudo mv sw  /.

Fourth: Update it:

source /sw/bin/init.sh
fink selfupdate
fink -y update-all
fink scanpackages

Fifth: Use it:

eg: To install coot and ccp4 from my binary distribution (it is set up already so you can do this), issue the following commands:

fink scanpackages
sudo apt-get update
sudo apt-get install coot
sudo apt-get install ccp4

eg: To install coot from source, issue the following commands:

fink selfupdate
fink -y update-all
fink -y install coot





Bootstrap Install from sourcecode for greater control

You can install a 64-bit fink into /sw, or, if you already have a 32-bit fink in /sw and for some reason you want to keep it (there really is no reason anymore), you can install a 64-bit fink into a different directory, eg: /sw64, where it can can coexist with your current 32-bit installation in /sw (although you can't use them in the same shell session). The following assumes you want to install everything in a directory called either /sw64. If you want to install 64-bit into /sw, go back to Section 1.

If you have no other fink installation (no directory called /sw ), you are better off in the long run putting it in /sw, as described in the previous section.




How to Bootstrap-Install Fink-64bit

In a bash or zsh shell, issue the command

cvs -d:pserver:anonymous@fink.cvs.sourceforge.net:/cvsroot/fink login
[just hit return when prompted for password]
cvs -z3 -d:pserver:anonymous@fink.cvs.sourceforge.net:/cvsroot/fink co -P fink


Then do

cd fink ; ./bootstrap /sw

or



cd fink ; ./bootstrap /sw64

as appropriate.

The bootstrap configuration will ask you two questions that you must answer in the following way.

Pay attention, because the answer to the second question is NOT the default!


Fink must be installed and run with superuser (root) privileges. Fink can automatically try to become root when it's
run from a user account. Since you're currently running this script as a normal user, the method you choose will also
be used immediately for this script. Avaliable methods:

(1)     Use sudo
(2)     Use su
(3)     None, fink must be run as root

Choose a method: [1] 


Your hardware is a 64bit-compatible intel processor, so you have the option of running Fink in 64bit-only mode.  This
is not recommended for most users, since many more packages are available for the default mode (which is mostly 32bit
but includes some 64bit packages).  Which mode would you like to use?

(1)     Default (mostly 32bit)
(2)     64bit-only

Choose a mode: [1] 2


For now on, I will use "/sw* " to mean "/sw or /sw64 as appropriate."

When it is done, edit /sw*/etc/fink.conf and change line 4 to look like this:

Trees: local/main stable/main stable/crypto unstable/main unstable/crypto

This activates the unstable branch.

Then issue

source /sw*/bin/init.sh
fink selfupdate-cvs
fink -y update-all
fink scanpackages





Install x86_64 versions of crystallography software

The normal, official Fink way is to compile everything yourself. If you are in a hurry, you might find it easier to use my unofficial pre-compiled Fink binary distribution.


Using my Pre-Compiled Fink Packages

For 10.7.X: Go here











If you put fink into /sw

First you need to edit the /sw/etc/apt/sources.list file and add the following line to the bottom of that file:


deb http://scottlab.ucsc.edu/fink_intel_10.6_64bit_sw    stable main  
 


That's all you need, but more detailed information is located here: Getting your fink installation to use packages that I have pre-compiled

Now you can install fink packages that I have pre-compiled using the apt-get command. Here is an example for installing coot:

fink scanpackages
sudo apt-get update
sudo apt-get dist-upgrade 
sudo apt-get install coot

(The more or less equivalent fink -b install coot command doesn't work with a directory named anything other than /sw. Sorry for earlier claims to the contrary.)



Compiling it with Fink

This is the official Fink-approved way to do it:

To install coot, issue

source /sw*/bin/init.sh
fink install coot

To install ccp4, issue

source /sw*/bin/init.sh
fink install ccp4

You, or your shell startup files, need to issue

source /sw*/bin/init.sh

before running these programs, or

source /sw*/bin/init.csh

if you are a tcsh user.

Personal tools